EN
TECHNICAL SPECIFICATIONS
| Control system | System | FANUC/SYNTEC |
| Processing range | Fast movement speed | X-axes: 24 meters per minute; Other axes: 30 meters per minute |
| Diameter of the bar stock held by the main/auxiliary spindle | Without φ3-φ35mm With a guide sleeve φ28mm | |
| Maximum drilling diameter of the main spindle | φ12mm | |
| Maximum pitch diameter of the main spindle | M10 | |
| Maximum drilling diameter of the secondary spindle | φ8mm | |
| Maximum pitch diameter of the secondary spindle | M6 | |
| Maximum drilling diameter of the side-milling power head | φ10mm | |
| Maximum tapping diameter of the side-milling power head | M8 | |
| Motorized spindle | Main/auxiliary spindle power | 11KW/11KW |
| Main/auxiliary spindle maximum rotational speed | 6000r/min | |
| Fast headstock | Key-type movable guide sleeve stroke | 220mm |
| Maximum movement amount | Without condom (optional) | 360mm |
| Cutter | Number of cutting tools | 7 pieces of 16*16mm |
| Side-mounted power cutting tool | 5 pieces of ER20 power cutting tools | |
| Spindle end face tool | 4 pieces of ER16 fixed cutting tools plus 3 pieces of ER16 power cutting tools | |
| Secondary spindle end face tool | 5 pieces of ER16 fixed cutting tools plus 8 pieces of ER16 power cutting tools | |
| Maximum rotational speed of the power head | 5500r/min | |
| Machine overall dimension | Dimensions (length, width, height) | 2700*1450*1800mm |
| Machine tool weight | Weight | 3800kg |
- This machine adopts a hydraulic clamping structure (hydraulic rotating cylinder) for the main shaft and auxiliary main shaft. It ensures that the workpiece will not come loose during drilling and heavy cutting.
- TD366, it uses a mechanical shaft structure with large bearings and good rigidity, and has strong cutting capacity.
- The maximum processing length of the main shaft in this machine is 220mm.
- The one-sided U-shaped indexing structure ensures no chips are stuck during rough machining and turning.
- The large screw rod adopts a double-nut structure of 32mm in the middle and 25mm at the middle. It uses large guide rails: 30mm and 25mm, which ensure the rigidity of cutting. The screw rod bearing seat is of a dedicated high-precision structure.
- Each axis uses a high-power servo motor with a thrust of 1300W and 850W to ensure heavy cutting capacity.
- The power head ER20 and ER16 have good rigidity for milling. The entire machine has a moving speed of 30m/min, which is suitable for high-speed cutting and has high efficiency.
- The power heads S3, S4, and S5 can be applied in any direction with ease.
- This machine is equipped with 32 cutting tools, and it can be optionally equipped with plug-in power heads and cyclone milling heads.
- The machine body, motor frame, bearing seat, and auxiliary main shaft table all adopt a combined structure to ensure a tight mechanical structure and a beautiful appearance.
- This machine is standardly equipped with high pressure, and 40-70kg can be selected. The weight of this machine is 4000KG.
