| Spesifikasi Teknis | ||
| gaya nominal silinder utama/Master cylinder nominal force | KN | 1200 |
| diameter silinder minyak utama/Main cylinder diameter | mm | 300 |
| gaya nominal silinder pelat tarik/Nominal force of the plate cylinder | KN | 180 |
| diameter silinder pelat tarik/The draw plate is determined by the cylinder diameter. | mm | 140 |
| tekanan penggunaan sistem/System usage pressure | MPa | 13~25 |
| langkah silinder utama/Master cylinder stroke | mm | 250 |
| langkah silinder pelat tarik/Plate cylinder stroke | mm | 180 |
| diameter kue yang dibentuk/Diameter of the formed cake | mm | φ70 |
| tinggi kue yang dibentuk/Formed cake height | mm | 50-80 |
| berat per unit/single weight | Kg | 0.8-1.5 |
| kecepatan/speed | kali/menit |
2–3 kali/menit 2–3 kali/menit |
| hasil produksi/Yield | kilogram/jam | 150-200 |
| daya motor utama/Main motor power | KW | 7.5 |
| metode pengendalian/Control method |
Kontrol PLC, komponen listrik utama menggunakan merek CHINT Pengendalian PLC, komponen listrik utama berasal dari Chint. |
|
| dimensi unit utama (panjang × lebar × tinggi)/Main unit dimensions (length × width × height) | mm | 1200*700*1500 |
| kapasitas tangki bahan bakar/fuel tank capacity | L | 100 |
| dimensi eksternal tangki bahan bakar (panjang × lebar × tinggi)/Fuel tank external dimensions (length × width × height) | mm | 700*500*1100 |
| dimensi luar silo (panjang × lebar × tinggi)/External dimensions of the silo (length × width × height) | mm | 1000*600*800 |
Hak Cipta © GUANGDONG FUTUER GROUP CO.LTD — Kebijakan privasi
EN